Compartment quick furnace

Compartment rapid heating furnace Products:
Do not Fragment furnace temperature uniformity throughout the large ingot heating periodic temperature regime (ie furnace temperature divided by the time the warm-up period, the heating period, the soaking period) two chamber furnace types: fixed-hearth chamber furnaces and car bottom furnace the fixed hearth room furnace hearth area generally 1 to 10 m 2. put on a material by manual or simple mechanical; chamber furnaces to heat a larger workpieces, put on a feeder with a special fuel for coal, heavy oil or gas to some furnace in the furnace wall to open a gap, the blank gap into the furnace heating called seam furnace, heating commonly used in small pieces or the long billet ends or local heating of this type of furnace hearth yield per unit area is usually 300 to 400 kg / (m 2 ·), specific heat consumption per ton of steel is about (1.0 to 1.5) × 106 kcal car bottom furnace for ingot weight of more than ten tons to hundreds of tons of heating before forging, furnace chamber or tunnel. heating objects placed in the trolley furnace loading and unloading by the workshop crane or other traction devices trolley pulled into or out of the furnace, the large ingot heating requirements furnace temperature evenly distributed, so the car bottom furnace normally distributed heating and dispersing smoke (burner and smoke crossing dispersed arranged on the side of the furnace wall).
Compartment rapid furnace work:
Stars chamber quick heating furnace heating chamber placed in a line by a certain compartment provided between the heating chamber and the heating chamber, the transfer roller of the preform is provided in the indoor blanks single (or double root) to which is heated by the heating chamber and the chamber between each heating chamber and adjacent compartments constitute a furnace section, so called furnace section. furnace for rapid heating, oxidation and decarburization applicable in heated circular blanks and steel pipe. compatible with the planetary mill, can be used to heat the continuous casting slab; localized heating of certain steel disadvantage is the low production capacity per unit length of the furnace, the lower the thermal efficiency of the furnace chamber The furnace used for heating before the metal billet or ingot forging does not move when the material is heated;